UV-LED Curable Silicone

UV-SIL UV-LED curable silicones for 3D printing

Polymer-G’s UV-LED curable silicones products represent a break-through in UV -LED Cure silicone technology.  The silicone bid comes out of the nozzle, which rapidly deposits it layer by layer governed by the computer file with the design software. The UV- Sil cures on the spot when exposing to the UV- LED lamps in the printer head, thanks to the special photo initiator (QPI) that has been developed by Polymer-G.

Main Benefits

  • Speeds time to market
  • Enables use of silicones in complicated designs
  • Easy to use

QPI-3000 Series - Cure accelerator additive

Our newly and modified development of UV-LED cure accelerator additive for  addition cure silicone’s.
Using QPI-3000 additive, you can control the curing of the silicone and make it much faster.

By adding 1%-5% of the QPI-3000 you can benefit from long pot life and fast UV-LED

No Properties Change
QPI-3000 contains >99.9% of the base silicone polymer, securing no properties change of cured product.

QPI-3000 series

DOWSIL Product QPI Additive % add to Base Price Impact
DOWSIL 184 QPI-3185 * 1% – 5% 15% – 35% increase
DOWSIL 170 QPI-3170 * 2% – 4% 20% – 40% increase
DOWSIL 93-500 QPI-3500 ** 2% – 3% Low
DOWSIL Q3-6575 Gel QPI-3575 ** 1% – 2% Very High
* Available in 100gr bottle and 1kg metal can ** Available in 10gr bottle only

Storage: Store products at 18-30°C for maximum shelf life.

Packaging: Packaging sizes are available from 1L to 25L containers.

Shelf Life: These products have a shelf life of 12 months in unopened original containers.

Limitation of Liability: Except where prohibited by law, Polymer-G and seller will not be liable for any loss or damage arising from the Polymer-G product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.