3D Printing

The excitement around the promise of 3D printing has opened the floodgates. New printers are being developed every day. Typically 3D printer uses thermoplastics and resins, This new material our epoxy based EPV series opens up another channel for 3D printing that has high strength structural applications that can stand extremely  harsh environmental conditions.

Our UV-LED curable silicones products represent a break-through in UV -LED Cure silicone technology.  The silicone bid comes out of the nozzle, which rapidly deposits it layer by layer governed by the computer file with the design software. The UV- Sil cures on the spot when exposing to the UV- LED lamps in the printer head, thanks to the special photo initiator (QPI) that has been developed by Polymer-G. 

uv epoxy

UV-LED curable epoxy for 3D printing

UV-LED curable silicone for 3D printing

Storage: Store products at 18-30°C for maximum shelf life.

Packaging: Packaging sizes are available from 1L to 25L containers.

Shelf Life: These products have a shelf life of 12 months in unopened original containers.

Limitation of Liability: Except where prohibited by law, Polymer-G and seller will not be liable for any loss or damage arising from the Polymer-G product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.

Success Stories

From the magazine